Sale!
7777
V75-WT Samples; Neutral, Mid-grey & Blackc_use3v75Nexus ProJoint Professional high strength jointing compound and sand – for paving, driveways and roads  V400 (27kg pack)

Nexus ProJoint Professional high strength jointing compound and sand – for paving, driveways and roads V400 (27kg pack)

V400 (high strength)
Neutral
Grey
Black
SKU: N/A.

Product Description

The Nexus  product is a revolutionary way to joint paving slabs of all varieties, from Portuguese granite to Indian Stone, cobbles and budget paving. If you are looking for the quick, clean and convenient solution to professional joint or point paving stones of all varieties – choose Nexus.

Pre grout reduces  the film of resin that remains after grouting( note this  film wears off naturally)

V400 WT.      KEY FACTS:

    Two-part resin based mortar system, cement free

  • Heavy traffic loads up to 40 tonnes, ideal for high traffic areas and roadways
  • Can be laid on permeble and non permeable bases
  • Self compacting so fast and easy application – without bending or kneeling
  • Professional strength suitable for joint widths of 5mm upwards
  • Weed, pressure washer and frost resistant
  • Suitable for natural stone and concrete paving, setts and slabs
  • available in three colours:  neutral (buff), mid grey and black.
  • V400-WT is not recommended for use with porcelain paving – please refer to the ProJoint Porcelain Primer and Grout product pages for more information.

Our unique formulation of flexible polymers provide a hard wearing, flexible and professional finish without all the hassle of conventional mortar.

Rest assured you’ll be amazed with the ease of use, strength and durability of this product. It’s simply the 21st Century way to to joint and point paving – the choice of professionals.

Using our unique paving jointing formula is a simple three step process – so easy anyone can do it!

  1. Mix resin and polymer ie. Part A & B together. Mix thoroughly then add water, same amount as part A & B. Then add sand. Mix until a porridge like mix is achieved. Product weight 27 Kgs.
  2. Wet area to be pointed and empty contents into piles.
  3. Immediately brush across joints until joints are full then brush away excess sand.

Question. Is it cost effective in the long run?

Answer. Yes as Nexus  takes far less time to apply and can be applied in inclement weather conditions such as rain or extreme heat etc.

Question. Does it change the colour of the paving after pointing?

Answer. Only very slightly at first or not at all. After a short time will disappear completely. And it usually enhances the colour of the product.

Question. Will Nexus  last longer than sand cement etc.?

Answer. Nexus is far more hard wearing and tolerant from erosion, expansion and contraction than standard sand/cement/mortar.

Question. Can Nexus be applied at different times eg. day by day?

Answer. Yes without colour change or loss of performance.

Question. Once the product had been opened must all the product be used like some other epoxy mortar products?

Answer. No you only mix the amount you need.

Further notes when using Nexus:

  • Nexus should be applied with a minimum pointing depth of approx. 10mm.
  • Drying times vary according to temperature summer approx. 3-4 hours / winter 4 – 8 hours plus
  • Tools for the job – Brushes: Stiff and then soft. Mechanical mixer or mix in bucket trowel or jointer optional.
  • Protective clothing is essential ie. Oil proof gloves, safety glasses, coveralls, boots etc.
  • Care should be taken when applying resin mortar not to transfer resin on feet or gloves etc.
  • Clean all tools with soapy water.