Product Description
A water-based pre-grout treatment for all types of porcelain, natural stone or concrete paving, whether it is inside or out. Designed to help with grout or jointing compound release, the Nexus PaveCareTM Pre-Grout Stone & Porcelain Paving Sealer is suitable for use with any ProJointTM jointing products, and should be used once the paving has been firmly laid in position upon a suitable bedding area.
The PaveCareTM Pre-Grout Stone & Porcelain Paving Sealer can also be used once any grouting has been completed, and is fully cured, to protect the paving and aid with the removal of stains and direct from organic matter.
- Professional strength pre-grout sealer treatment
- Assists in reducing resin sheen and grout haze
- Water-based – can be used all year round
- High coverage rate: stone up to 15m2 per litre, porcelain up to 30m2 per litre
- Ideal for all types of textured porcelain tile surfaces, or natural stone
- Suitable for use with all ProJointTM grouting products
application…
(full instructions are printed on each container)
The PaveCareTM Pre-Grout Stone & Porcelain Paving Sealer is designed as
an invisible coating but may darken very light surfaces slightly – as with all
sealants, test on a small inconspicuous area before full application.
Supplied ready to use The PaveCareTM Pre-Grout Stone & Porcelain Paving
Sealer is simple to apply to clean paving with a surface temperature of
5oC to 25oC.
coverage 15 m2 per litre 1 coat natural stone and porcelain 25-30 m2 per litre.
2nd coat has a greater coverage
1. Shake the container well.
2. Apply a complete and even coat over the whole surface of the paving using
a brush, roller or spray, ensuring any excess is removed. Try to avoid getting into grouting gaps .
3. Allow to dry for 30 minutes.
4 .Apply a second even coat and leave to cure (around 1 hour depending on temperature).
